Do you have a room that could utilize a ceiling fan to cool it down Its not hard to install a ceiling fan on your own if you are planning to replace a light fixture. Most of the wires you need is already around so the only thing is to replace the current workbox with one that is designed for the weight of a ceiling fan. If you dont adjust the established workbox to something that can cope with the weight could mean disaster. Before you do anything, read the guidelines for your fan very thoroughly and make sure you have the essential tools.

If you are hanging the fan on the cathedral ceiling, you may need to acquire additional parts for extending the fan all the way down lower. Any time you are completely ready to set up the fan, be sure that the circuit breaker is off so you wont get electrocuted. Anytime you eliminate the light fixture, verify to see if the current workbox can hold the extra weight. Most of the time, the workbox will not be able to take on the extra weight so you may need even more support. Adding support to the workbox is not that hard if you have entry to the light fixture from the attic.

To help extra support, you nail a 2x4 inside the ceiling rafters where it meets the top of the workbox. Make sure that the 2x4 is attached and then bolt on the box to the wood woodworking plans. If you did it effectively, the weight of the fan must be well supported by the 2x4 wood and screws. In cases where you are unable to do it from the attic space or you have no attic, you will need to create a cross bracing in your ceiling. It is more difficult to do and may not be that reliable but its the best option if you have no attic admission.

woodworking plans So now, after assembling the fan as stated by the instructions, you are ready to hang any fan. The difficult part is positioning the fan, while hooking up the wiring. The problem is based on the kind of fan you have, whether it is a clinging frame or a fan that has a bracket with a J hook. Most of fans have a chain to master the speed of the fan and the wall switch turns the device on or off. If you also install a light kit with the fan, each can be monitored by a wall switch or chain.

The next step is to follow along with the wiring details which are as simple as connecting two white wires, two black wires and two ground wires. Now all you need to do is complete assembling the fan according to the guidelines, by attaching the fan blades. woodworking plans After you install the blades, the only thing left is to flip the breaker back on to see if you did it right.